|Ismerje meg, hogyan tudja beállítani és használni a legkorszerűbb mobil, VoIP, SMS és web funkciókat.|
If you or your corporation already have an operative PBX but you would like to use the
useful and particular features of the Ozeki Phone System XE you can easily connect them
by using the Ozeki Phone System XE VoIP service provider. It is also useful when you want
to connect your system to an outer service to make and accept calls by using outside lines.
It could be very effective to use the features of the Ozeki Phone System XE like the sending and receiving SMS messages besides VoIP calls and services and you can use the benefits of the Webphone of Ozeki. By connecting a webphone to your PBX you can make it possible for your customers to reach your support staff easily. Any web browser is capable of handling microphones and web cameras, making voice and video chat become available. And the visitors of your website can call your corporation for free because they can connect to your phone system.
This guide explains how you can connect Ozeki Phone System XE to your PBXnSIP server. All you need to do is to create an extension in PBXnSIP and Ozeki Phone System XE can use this extension to register to the PBX.
Voice Over IP is one of today's fastest growing technology. It makes it possible to create an advanced telephone application based on the existing network. VoIP technology is based on converting the voice into packets and transmits these packets towards the destination. This page explains you how to connect Ozeki Phone System XE to your PBXnSIP server.
If you follow the configuration steps of this guide, you will have a system that works as follows: First, you need to login to your PBXnSIP server using its web interface and create an extension. Ozeki Phone System XE will use this extension to register to the PBX. After registration you can start to reach your customers immediately. Figure 1 shows the overview of the system.
Figure 1 - Ozeki Phone System XE connected to PBXnSIP server
Before you start to configure this solution it is assumed that you have already installed PBXnSIP into your server.
Install your 3rd party PBX on your computer or virtual machine. Run installation. Select the folder you want to install the software and accept the license agreement. When you install the PBX, there are no passwords set up. You find the general system settings in the administrator mode (Settings). You can get the information about the server in System Status Overview.
In this example I have installed PBXnSIP to a computer that has the following IP address: 192.168.91.95. Start a browser and navigate to its built-in web interface and login as administrator (Figure 2).
Figure 2 - Login as administrator
Once you logged in, click on Accounts (Figure 3)
Figure 3 - Click on Accounts
Here you can see the created Extensions. I have already registered an extension which name is 100. I will register a VoIP phone to this account. Click on Create to create a new extension (Figure 4).
Figure 4 - Click on Create
Here you can create new accounts. Provide a Number and a SIP Password and click on Create (Figure 5).
Figure 5 - Create new extension
On Figure 6 you can see the created extension.
Figure 6 - Created extension
It is assumed that you have already downloaded Ozeki Phone System XE and installed it into you computer.
You will need to login to the Ozeki Phone System XE and install a VoIP provider. At the VoIP provider installation section you can set General, Network and Call options and you can select the audio and the video codecs of the calls.
You can reach the configuration of the VoIP service provider on the How to connect to VoIP service providers page.
If you have any questions or need assistance, please contact us at firstname.lastname@example.org
People who read this also read...
Cookies are enabled You are browsing the optimized version of this website. For more information read this website.