|Ismerje meg, hogyan tudja beállítani és használni a legkorszerűbb mobil, VoIP, SMS és web funkciókat.|
FreeSwitch is an open-source PBX application, which is more and more popular every day because of its flexibiity and richness in VoIP features. Now you can build your own application with VoIP support using FreeSwitch PBX. In this guide you can read about how to setup Ozeki Phone System XE with FreeSwitch PBX.
VoIP technology is one of the continuously evolving technologies nowadays. It offers cheaper prices and higher flexibility than PSTN lines. With VoIP technology, you can even use your existing network to enable voice capability in your company. It converts the voice data into packages and uses the existing network to deliver these packages to the recipient phone.
Ozeki Phone System XE utilizes the advantages of this technology and uses VoIP technology to place phone calls over the network.
In this guide you can read about how to get started and setup your system with Ozeki Phone System XE and FreeSwitch.
If you follow the configuration steps of this guide, you will have a system which is connected to FreeSwitch PBX. The system will work as follows:
First, you need to install your FreeSwitch server. After the installation is done, you can use one of its built-in extension to test the functionality. Ozeki Phone System XE can use this extension to register to FreeSwitch server. After the registration you can start making calls. Figure 1 demonstrates the process.
Figure 1 - Connection with FreeSwitch
Before you start to configure FreeSwitch PBX, it is assumed that you have already prepared your Linux distribution for installing. In this guide I will use an Ubuntu linux distribution.
sudo apt-get installWrite the following packeges before "sudo apt-get install" command to install freeswitch "git-core build-essential autoconf automake libtool libncurses5 libncurses5-dev make libjpeg-dev pkg-config unixodbc unixodbc-dev zlib1g-dev" Select the directory, where you want to install the 3rd party PBX. Use the following commands to setup PBX for Ozeki Phone System connectiong.
git clone git://git.freeswitch.org/freeswitch.git cd freeswitch ./bootstrap.sh compile the source ./configure make
After you need to configure the 3rd party PBX. Just install sound packs with the following commands.
make all install cd-sounds-install cd-moh-installTo configure the server, locate the vars.xml file and modify the proper data to configure users, you can see an example endpoint configuration, named 1000.xml After you install this PBX you can install and configure it for Ozeki Phone System XE connection. So let start with configure the SIP account.
First, you need to log in to your linux distribution, and start a terminal. Since it is an Ubuntu distribution, I will put sudo in front of each command, which I want to run with Administrator privileges. First, you need to install the mandatory prerequisite packages into your linux distribution. For this, type the following into your terminal (Figure 2):
view plaincopy to clipboardprint? sudo apt-get install git-core build-essential autoconf automake libtool libncurses5 libncurses5-dev make libjpeg-dev
Figure 2 - Install the prerequisite packages
In this guide I will install the Git version of the FreeSwitch PBX. For this, I will type the following (Figure 3):
view plaincopy to clipboardprint? sudo git clone git://git.freeswitch.org/freeswitch.git
Figure 3 - Checkout the latest release from the repository
Next, enter into the downloaded freeswitch directory (Figure 4).
view plaincopy to clipboardprint? cd freeswitch
Figure 4 - Enter into the freeswitch directory
Execute the bootstrap script (Figure 5).
view plaincopy to clipboardprint? sudo ./bootstrap.sh
Figure 5 - Bootstrap script
Configure the source code by executing the configure script (Figure 6).
view plaincopy to clipboardprint? sudo ./configure
Figure 6 - Execute the configure script
Compile the source code (Figure 7).
view plaincopy to clipboardprint? sudo make
Figure 7 - Compile the source code
Install FreeSwitch (Figure 8).
view plaincopy to clipboardprint? sudo make all install cd-sounds-install cd-moh-install
Figure 8 - Install FreeSwitch
Now FreeSwitch is installed to the /usr/local/freeswitch directory. Start FreeSwitch PBX (Figure 9).
view plaincopy to clipboardprint? sudo /usr/local/freeswitch/bin/freeswitch
Figure 9 - Start FreeSwitch PBX
I will use a desktop telephone for testing purposes. In Figure 10 you can see that this desktop telephone is registered to line 1002.
Figure 10 - Registered desktop telephone
There are several pre-defined extensions in FreeSwitch PBX. You can use extensions from 1000 to 1019 with password 1234 for testing purposes. I will use these extensions to demonstrate the functionality of Ozeki Phone System XE with FreeSwitch PBX. Now you can configure Ozeki Phone System XE.
It is assumed that you have already downloaded Ozeki Phone System XE and installed it into you computer.
You will need to login to the Ozeki Phone System XE and install a VoIP provider. At the VoIP provider installation section you can set General, Network and Call options and you can select the audio and the video codecs of the calls.
You can reach the configuration of the VoIP service provider on the How to connect to VoIP service providers page.
If you have any questions or need assistance, please contact us at email@example.com
People who read this also read...