How to setup Ozeki Webphone Gateway with Plain HTML
By connecting a webphone to the Ozeki Phone System XE you can make it possible for your customers to reach your support staff easily. Any web browser is capable of handling microphones and web cameras, making voice and video chat become available. This leads to numerous new possibilities: fast, effective and easy-to-use availability (results in higher income) for companies, great quality communication and also fast, effective and easy-to-use accessibility for the customer.
This guide help you to build your own CMS system with a Webphone Gateway. It makes you more possibilities to reach your customers or your friend over the webphone connection. You can easily create this phone if you follow the steps and step the tools which important for the connection. Ozeki Wephone Gateway provide you a new facility in world wide web. You can use it to your own businesss and your aims. In order to build your own Webphone Gateway and start calling your contacts, you can connect Ozeki Phone System XE to your CMS System.
System architecture
Figure 1 - Connect with Plain HTML
If you follow the steps of the configuration guide below, you will have own CMS system which is connected to Ozeki Webphone Gateway. The system will work as follows:
- Create your own Plain HTML website
- Add Ozeki Phone System XE Webphone Gateway to your own site.
- Connect the Webphone with Ozeki Phone system XE
- You can start call your contacts via Ozeki Webphone Gateway
In this few step you get information about how can you configure and build your plain HTML with Ozeki Phone System XE Webphone Gateway. Before you start to configure this solution it is assumed that you have already installed your Ozeki Phone System XE, downloaded from this page.
Step 1.) Install Plain HTML
You have to download a text editor or a specific HTML editor, which you can use to create your own webpage. In this example, we use Notepad++. You will also need a plain HTML document. (Figure 2)
Figure 2 - Sample HTML document
Step 3.) Connect Plain HTML with Ozeki Webphone Gateway
Paste the JavaScript code, you generated into your editor. Note that, if the PBX and the webserver are hosted in different computers, you have to replace the generated IP address with the address of the PBX. Also change the port number to 80. Save the file and open it with your browser. (Figure 3)
Figure 3 - Insert HTML code
Step 4.) Make a test call
Now go to your webpage and click on your webphone. A popup window will appear, where you will be able make calls. (Figure 4)
Figure 4 - Make test call
You can dial your own SIP devices if you click on the calling button. You should set a dial plan, don't forget to set it, because it will transmit the call to your customer (Figure 5).
Figure 5 - Check calling on Call History
Conclusion
If you have followed these steps, then you have installed the Ozeki Webphone Gateway and you have made phonecalls over the Webphone Gateway in your web browser. In these steps you could learn new possibilities of the CMS system of your business. You can add your Webphone Gateway into your website or your CMS system. If you have followed these steps and you have finished the configuration, then you can make phonecalls over the Webphone and you can dial your own phones and other devices which support the SIP protocoll.
If you have any questions or need assistance, please contact us at info@ozekiphone.com
Dig deeper!
People who read this also read...