Compatible VoIP ATA devices
For connecting analog telephone networks and connecting analog telephone sets to Ozeki Phone System, an ATA device is required. An ATA device converts analog signals to digital and sends it over the internet. Every ATA device gets an IP address which is needed to communicate with Ozeki Phone System.
An ATA always has an ethernet connection to connect to the LAN, so it functions as a router. It also has FXO, FXS ports. The FXO connects the ATA to the PSTN, which is the analog phone network. The FXS connects the ATA to an analog phone or a fax machine (Figure 1). Some ATA devices has no FXO ports. So if you want to connect to the PSTN, be careful what you buy.
Figure 1 - An ATA device and its connections
To help you choose the best device that fits you, we will show you a few:
- Cisco SPA122 (2*FXS)
- Cisco SPA8800 (4*FXO+4*FXS)
- Grandstream HT502 (2*FXS)
- Grandstream HT503 (1*FXO+1*FXS)
- Grandstream HT701 (1*FXS)
- Grandstream HT704 (4*FXS)
- Linkpro ITG-S422 (2*FXO+2*FXS)
- Linksys SPA3102 (1*FXO+1*FXS)
- Linksys SPA8000 (8*FXS)
- Sangoma U100 (2*FXO)
- Zoom 5801/5802 (1*FXO+1*FXS)
- ZyXEL P-2302HW/P-2302HWL (1*FXO(P-2302HWL only)+2*FXS)
- ZyXEL P-2302R/P-2302RL (1*FXO(P-2302RL only)+2*FXS)
Cisco SPA122
|
|
Voice/Fax Codecs: G.711 (A-law and μ-law), G.726 (32 kbps), G.729 A, G.711, T.38 fax |
2 port SIP VoIP Gateway (2*FXS interface) The Cisco SPA122 includes two standard telephone ports to connect existing analog phones or fax machines to a VoIP service provider. It also includes two 100BASE-T RJ-45 Ethernet ports for WAN and LAN connectivity. Each phone line can be configured independently. With the Cisco SPA122, users can protect and extend their investment in their existing analog telephones, conference speakerphones, and fax machines, as well as control their migration to IP voice with an extremely affordable, reliable solution. It does not provide connection to analog phone networks, only analog phones or fax machines. Features:
Get more information from www.cisco.com |
Cisco SPA8800
|
|
Voice/Fax Codecs: G.711a, G.711u, G.726, G.729A, G.723.1, G.711, T.38 fax |
8 port SIP VoIP Gateway (4*FXO+4*FXS interface) The Cisco SPA8800 IP Telephony Gateway is a multipurpose solution that small businesses can use to connect an on-premise IP private branch exchange (PBX) system to the public switched telephone network (PSTN), or connect a legacy time-division multiplexing (TDM) PBX or key system to voice-over-IP (VoIP) services. The Cisco SPA8800 provides a combination of four Foreign eXchange Office (FXO) and four Foreign eXchange Subscriber (FXS) ports to connect to existing analog phones, which helps protect and extend your existing communications equipment investments, too. Features:
Get more information from www.cisco.com |
Grandstream HT502
|
|
Voice/Fax Voice Codecs: G.711(a/u-law), G.723.1, G.729A/B/E, G.726-40/32/24/16, iLBC, T.38 fax |
2 port SIP VoIP Gateway (2*FXS interface) The HT502 is a powerful VoIP router. The product's inclusion of an integrated high performance NAT router and dual 10/100Mbps Ethernet WAN and LAN ports enables a shared broadband connection between multiple ethernet devices. In addition to being SIP 2.0 standard compliant, the product supports Universal Plug-in-Play (UPnP), up to 2 SIP account profiles, and advanced telephony features. It does not provide connection to analog phone networks, only analog phones or fax machines. Features:
Get more information from www.grandstream.com |
Grandstream HT503
|
|
Voice/Fax Voice Codecs: G.711(a/u-law), G.723.1, G.729A/B/E, G.726-40/32/24/16, iLBC, T.38 fax |
2 port SIP VoIP Gateway (1*FXO+1*FXS interface) The HandyTone 503 offers the next generation of powerful, affordable, high quality and manageable IP telephony ATA/IAD. The integration of a FXO and FXS port enables remote call origination and termination to and from the PSTN line, known as "hop-on and hop-off" calling. This functionality coupled with its compact size makes it an ideal solution for road warriors seeking the savings and benefits of voice-over-ip communication. Features:
Get more information from www.grandstream.com |
Grandstream HT701
|
|
Voice/Fax Voice Codecs: G.711 with Annex I/II, G.723.1, G.729A/B, G.726, iLBC, T.38 Fax |
1 port SIP VoIP Gateway (1*FXS interface) HT701 is a next generation, powerful IP ATA (analog telephone adapter) for residential and road warriors. Its ultra-compact size, superb voice quality, rich functionalities, strong security protection, excellent manageability and auto provisioning, as well as unrivaled affordability enable service providers to offer high quality IP service at extremely competitive price. The HT701 is an ideal single-port ATA for large scale commercial IP voice service deployment. It does not provide connection to analog phone networks, only to an analog phone or a fax machines. Features:
Get more information from www.grandstream.com |
Grandstream HT704
|
|
Voice/Fax Codecs: G.711 with Annex I/II, G.723.1, G.729A/B, G.726, iLBC, T.38 Fax |
4 port SIP VoIP Gateway (4*FXS interface) HT704 is a next generation, powerful 4-port IP ATA (analog telephone adapter) for residential users and small businesses. It is compact size, superb voice quality, rich functionalities, strong security protection, excellent manageability and auto provisioning, as well as unrivaled affordability enable service providers to offer high quality IP voice service at extremely competitive price. The HT704 is an ideal 4-port ATAs for large scale commercial IP voice service deployment. It does not provide connection to analog phone networks, only to an analog phone or a fax machines. Features:
Get more information from www.grandstream.com |
LinkPro ITG-S422
|
|
Voice/Fax Codecs: G.711A/μ-law, G.723.1, G.729A, G.729, G.729B, G.729AB, T.38 Fax |
4 port SIP VoIP Gateway (2*FXO + 2*FXS interface) LinkPro ITG-S422 is a two FXO + two FXS port Gateway and support SIP RFC 3261 protocol. It supports an innovative intelligent call routing function that transparently routes calls to destination either through PSTN or internet. ITG-S422 provides Voice and Fax over IP services for ITSP/ISP (Internet Telephony Services Provider) and Office / SOHO IP-PBX application. Features:
Get more information from www.linkpro.com |
Linksys SPA3102
|
|
Voice/Fax Codecs: G.711 (A-law and μ-law), G.726 (16/24/32/40 kbps), G.729 A, G.723.1 (6.3 kbps, 5.3 kbps), T.38 Fax |
2 port SIP VoIP Gateway (1*FXO + 1*FXS interface) The Linksys SPA3102 supports one RJ-11 port to connect an existing analog phone or fax machine. The SPA3102 also supports one PSTN FXO port. The SPA3102 includes 2 100BaseT RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router. The SPA3102 FXS and FXO lines can be independently configured via software controlled by either the service provider or the end user. Features:
Get more information from www.cisco.com |
Linksys SPA8000
|
|
Voice/Fax Codecs: G.711 (a-law and µ-law), G.726 (16/24/32/40 kbps), G.729 A, G.723.1 (6.3 kbps, 5.3 kbps), G.711, T.38 Fax |
8 port SIP VoIP Gateway (8*FXS interface) Don't let analog phones come between you and Internet telephony. Part of Cisco Small Business Voice Gateways and ATAs, the SPA8000 8-Port IP Telephony Gateway allows for connections between eight analog telephones and an IP-based data network, providing small businesses with enhanced communication services through a broadband Internet connection. It does not provide connection to analog phone networks, only analog phones or fax machines. Features:
Get more information from www.cisco.com |
Sangoma U100
|
|
Voice/Fax Codecs: G711 ulaw, G711 alaw, L16 linear, G729 AB, G723.1, G722.1 (Siren 7), G722, GSM_FR, GSM_EFR, iLBC, G726, AMR |
2 port SIP VoIP Gateway (2*FXO interface) The Sangoma U100 is a low-cost development tool kit ideal for those who just want a simple external solution. The USBfxo is easy to install. There is no need to open up the computer to insert an interface card. Simply plug it in, configure Sangoma's Wanpipe drivers, as you would with any Sangoma card, and you're set to go. You can even connect multiple USBfxos in one system. It does not provide connection to analog phones or fax machines, only to analog phone networks. Features:
Get more information from www.sangoma.com |
Zoom 5801/5802
|
|
Voice/Fax Codecs: G.711, iLBC, G.729 (Model 5801 only) |
2 port SIP VoIP Gateway (1*FXO + 1*FXS interface) The Model 5801 and Model 5802 support industry-standard Session Initiation Protocol (SIPv2) and work with a wide range of service providers and SIP-based VoIP equipment. Both models provide one FXS and one FXO port and allow calls to be bridged between the Public Switched Telephone Network (PSTN) and Voice Over IP (VoIP). Features:
Get more information from www.zoomtel.com |
ZyXEL P-2302HW/P-2302HWL
|
|
Voice/Fax Codecs: G.711, G.729, T.38 Fax |
3 port SIP VoIP Gateway (1*FXO (P-2302HWL only) + 2*FXS interface) The P-2302HW-P1 is a 4-port wireless router with Voice over IP (VoIP) communication capabilities that allow you to use a traditional analog telephone to make Internet calls. The P-2302HW-P1 is also a complete security solution with a robust firewall and content filtering. The P-2302HWL-P1 adds a Public Switched Telephone Network (PSTN) line feature which allows you to use your regular phone services and internet telephone services at the same time. Model P-2302HW does not provide connection to analog phone networks, only analog phones or fax machines. Features:
Get more information from www.zyxel.com |
ZyXEL P-2302R/P-2302RL
|
|
P-2302R
P-2302RL Voice/Fax Codecs: G.711, G.729, T.38 Fax |
3 port SIP VoIP Gateway (1*FXO (P-2302RL only) + 2*FXS interface) The single box serves two communication lines simultaneously; and its concurrent G.729 capability on each phone port is a great solution for environments with limited bandwidth. The flexible dial mechanism and one or two communication lines can be assigned freely to two phone ports. The P-2302RL-P Series is an inexpensive, easy to install and use, clutter-free solution to broadband users connecting to the Internet or a local area network. The users can also effortlessly configure the routing/bridge mode with WebGUI according to environment needs. Model P-2302R does not provide connection to analog phone networks, only analog phones or fax machines. Features:
Get more information from www.zyxel.com |
Conclusion
ATA devices are used to connect analog phones or analog phone lines to your computer. The number of FXS ports determine the number of phones that can be connected. Analog phone lines are connected to FXO ports, the more FXO ports you have the more analog networks you can connect with Ozeki Phone System.
If you have any questions or need assistance, please contact us at info@ozekiphone.com
Dig deeper!
People who read this also read...
- How to connect analog phone lines to Ozeki Phone System
- How to add mobile extensions to Ozeki Phone System
- How to connect analog or VoIP desktop phones to Ozeki Phone System.
- How to connect SMS services to Ozeki Phone System
- Everything about Webphone Technology - Live chat, voice calls, video calls, click to call